COPROX - Cement Additive - 5kg (CC-CEM-5)

COPROX Cement Additive – 5KG is a high-performance waterproofing admixture designed to be added directly to cement mixtures to enhance water resistance, strength, and durability. It effectively waterproofs cement-based applications by reducing porosity and increasing density, forming an integral barrier against moisture penetration.

This additive is widely used in plaster, screeds, concrete, and mortar to improve bonding, workability, and resistance to dampness, efflorescence, and cracking. When mixed with cement, COPROX Cement Additive chemically reacts to seal capillaries and micro-cracks, providing long-lasting protection from both positive (external) and negative (internal) water pressure.

Key Features & Benefits:

• Integral Waterproofing Protection: Permanently waterproofs cementitious materials from within by sealing pores and capillaries.

• Improves Durability: Increases strength, flexibility, and resistance to cracking and surface degradation.

• Enhances Workability: Provides a smoother, creamier texture for easier mixing and application.

• Prevents Dampness & Efflorescence: Reduces water absorption and stops salt formation on finished surfaces.

• Multi-Purpose Use: Suitable for concrete, plaster, mortar, screeds, and renders.

• UV & Weather Resistant: Ensures long-term protection in both interior and exterior environments.

• Eco-Friendly & Non-Toxic: Free from harmful chemicals, making it safe for use in residential, commercial, and water-retaining structures.

Applications:

COPROX Cement Additive is ideal for use in:

• Plaster and render for interior and exterior walls

• Concrete foundations, slabs, and retaining walls

• Floor screeds and topping mixes

• Bricklaying mortar and blockwork

• Basements, bathrooms, and water tanks

• Ponds, flower boxes, and waterproof coatings when used with COPROX Masonry Waterproofing

Directions for Use:

1. Preparation:

   • Ensure all surfaces and mixing equipment are clean and free from dirt, grease, or oil.

   • Use clean water for mixing.

2. Mixing:

   • Replace the mixing water partially or completely with COPROX Cement Additive.

   • The typical dilution ratio is 1 part COPROX Cement Additive to 2 parts clean water, depending on the required waterproofing level.

   • Mix thoroughly until a uniform, workable consistency is achieved.

3. Application:

   • Apply the prepared mix using standard plastering, screeding, or concrete methods.

   • For maximum protection, apply in two coats or layers where possible.

   • Cure as normal, keeping the surface damp for 24 hours for optimal strength and bonding.

Technical Specifications:

• Type: Liquid waterproofing admixture

• Form: Water-based liquid concentrate

• Colour: White (dries clear when mixed)

• Mixing Ratio: 1 part additive to 2–3 parts water (depending on application)

• Coverage: Varies depending on mix design (typically 1L covers 5–8 m² when used in plaster or screed)

• Density: ±1.02 g/cm³

• pH: Neutral

• Compatibility: Suitable with OPC (Ordinary Portland Cement) and blended cements

• Packaging: 5KG container

Storage & Handling:

• Store in a cool, dry place away from direct sunlight and freezing temperatures.

• Keep container tightly closed when not in use.

• Shelf life: 12 months in unopened packaging.

• Avoid ingestion or contact with eyes; rinse immediately with clean water if contact occurs.

• Refer to the Safety Data Sheet (SDS) for detailed safety and first aid instructions.

COPROX Cement Additive – 5KG (CC-CEM-5) provides an advanced solution for waterproofing, strengthening, and enhancing cement-based materials. Whether used in plaster, mortar, or concrete, it ensures superior protection against moisture ingress, extending the life and appearance of all masonry and structural applications.